How much would it cost to paint a 14ft aluminum boat? - aluminum boat renovation forum
The boat is made of silver aluminum on the outside. But what would the amount of paint to be had? Can I first of all. If what I'm lookin to paint. Only it was not inside.
Do not paint an aluminum boat. It's too much work.
ReplyDeletehttp://www.paintcenter.org/rj/sep03i.cfm
Preparation of a preparation of aluminum metal, which you can get the car in a store art supplies. This leads to a bluish effect or influence of the rainbow.
Wash the preparation of the metal first with the first. Primer is a primer of zinc chromate wash, which is mixed with phosphoric acid mixture normally 50/50.
When spraying a coat of fixative to wash enough light, so can see through it. (transparent) as a rule, if not injected too thick to keep the first wash in May correctly.
Primmer washcoat with a 2-epoxy primer sealer or primer. First you need a zero before the last layer. Cereal with 180 D / A sandpaper on D / A mode (double) Sander. difficult to get to places use red scotch brite scratch.
Primmer / sealant can usually be quickly painted by at least 20 minutes and usually no more than a few hours after. I sugguest with a polyurethane varnish the truth. Imron or equililant. This is a painting Stang, it means that glitters WithoUT needs a clear coat.
A polyurethane varnish gloss finish and is resistant to the elements without difficulty.
http://www.finishing.com/50/57.shtml
It is to be given very low that it is a small boat. I have an aluminum boat 14 meters in front of me, but I do not want to paint. It is still too much to keep.
ReplyDeleteto go to a dealer ship and see what they say.
Why paint? Use a good aluminum cleaner and a new sheen.
ReplyDelete200.00
ReplyDeleteI paint and clear coat everything.
Where to call you.